Volume 32; Issue 01
If you select a title you will receive more information about the paper and the option to download the paper in Acrobat PDF form
A review on particulate-reinforced titanium matrix composites: S RANGANATH, PP. 01-16
Dielectric and field-induced strain behaviour of (Pb1-xBax) ZrO3 ceramics: KI HYUN YOON, SOON CHEOL HWANG, DONG HEON KANG, PP. 17-21
Failure of ceramic/fibre-reinforced plastic composites under hypervelocity impact loading: J JANG, R PARK, Y YUN, J PARK, H KIM, PP. 23-33
Combined effects of thin-section size, grain size and cavities on the high temperature creep fracture properties of a nickel-base superalloy: A BALDAN, PP. 35-45
Fabrication of particulate reinforced magnesium composites by applying a spontaneous infiltration phenomenon: HIROMITSU KANEDA, TAKAO CHOH, PP. 47-56
Preparation of La1−xSrxMnO3 powders by combustion of poly(ethylene glycol)-metal nitrate gel precursors: HYU-BUM PARK, HO-JIN KWEON, YOUNG-SIK HONG, SI-JOONG KIM, KEON KIM, PP. 57-65
Stress corrosion cracking of pyrotherm reformer tube for steam-reforming hydrogen production: T. C CHOU, W HUANG, R PACIEJ, PP. 67-72
Study of structural transformations in potassium-exchanged zeolite A induced by thermal and mechanochemical treatments: C KOSANOVIC, B SUBOTIC, I SMIT, A CIZMEK, M STUBICAR, A TONEJC, PP. 73-78
Reconfirmation of the existence of delta2 in dental amalgams: N. K SARKAR, K LIAN, PP. 79-82
Crystallization behaviour and microstructural evolution of a Li2O-Al2O3-SiO2 glass derived from spodumene mineral: ASTRID NORDMANN, YI-BING CHENG, PP. 83-89
Reaction and diffusion path of an interface reaction between Cu2O and nickel: H INABA, PP. 91-97
Oxygen gas sorption of Mn(II) complex salts of ethylene ionomer with various organic amines: S KUTSUMIZU, Y WATANABE, S YANO, H TACHINO, H HARA, Y KUTSUWA, PP. 99-103
Gel formation in mullite precursors obtained via tetraethylorthosilicate (TEOS) pre-hydrolysis: Y. X HUANG, A. M. R SENOS, J ROCHA, J. L BAPTISTA, PP. 105-110
Rheological and mechanical properties of poly(butylene terephthalate)-modified epoxy resins: XIA WANG, YIMING LI, YUNZHAO YU, PP. 111-114
Comparison between the mechanical and dielectric strength distributions for hardened gypsum: YOSHINOBU NAKAMURA, MIKITO SUZUKI, NAOBUMI MOTOHIRA, AKIRA KISHIMOTO, HIROAKI YANAGIDA, PP. 115-118
Effect of antimony surface treatment on nitrogen absorption during batch annealing of an electrical steel sheet: TAISEI NAKAYAMA, TAKASHI TANAKA, AKIHIRO YAUCHI, HIROYOSHI YASHIKI, PP. 119-122
Interaction between dislocations and precipitated water bubbles during high temperature creep of quartz: A AYENSU, PP. 123-128
Characterization of artificially patinated layers on artistic bronze exposed to laboratory SO2 contamination: J. M BASTIDAS, A LOPEZ-DELGADO, F. A LOPEZ, M. P ALONSO, PP. 129-133
Effect of sintering temperature on the characteristics of carbons based on mesocarbon microbeads: G BHATIA, R. K AGGARWAL, N PUNJABI, O. P BAHL, PP. 135-139
Determination of the feasibility of using attenuated total reflectance Fourier transform-infrared spectroscopy to evaluate thermal ageing of enamel-coated magnet wire: P. J BREMER, G GEESEY, PP. 141-146
On the durability of composite rehabilitation schemes for concrete: use of a peel test: V. M KARBHARI, M ENGINEER, D. A ECKEL II, PP. 147-156
Influence of process conditions on the surface oxidation of silicon nitride green compacts: S. M CASTANHO, R MORENO, J. L. G FIERRO, PP. 157-162
Synthesis and formation mechanism of submicrometre spherical cordierite powders by ultrasonic spray pyrolysis: DJ JANACKOVIC, V JOKANOVIC, LJ KOSTIC-GVOZDENOVIC, S ZEC, D USKOKOVIC, PP. 163-168
Silver halide-containing photochromic powders of SiO2 sol-gel glass: A KRILTZ, M MULLER, R FACHET, H BURGER, PP. 169-175
A photoemission study of the YBa2Cu3O7-Au composite: C HINNEN, C NGUYEN VAN HUONG, P.J GODOWSKI, PP. 177-184
Mechanical properties of silicate glass-ceramics containing tricalcium phosphate: M ASHIZUKA, E ISHIDA, PP. 185-188
Preparation of fine powders with perovskite structure from metal alkoxides: T FUKUI, C SAKURAI, M OKUYAMA, PP. 189-196
Mechanical properties and microstructure of ZrO2-SiO2 composite: SHI-WEI WANG, XIAO-XIAN HUANG, JING-KUN GUO, PP. 197-201
A study on selected properties of La1-xSrxCoO3 and its application in sealed CO2 lasers: JIANG LIU, LANYING HE, GUANGYU CHEN, WENHUI SU, PP. 203-206
Growth and structure of TiCxNy coatings chemically vapour deposited on graphite substrates: S EROGLU, B GALLOIS, PP. 207-213
Fatigue behaviour of 3-d SiC/SiC Composites: V KOSTOPOULOS, L VELLIOS, Y. Z PAPPAS, PP. 215-220
Joint strength and interfacial microstructure in silicon nitride/nickel-based Inconel 718 alloy bonding: WOO-CHUN LEE, PP. 221-228
Characterization of silicides in high-temperature titanium alloys: A. K SINGH, C RAMACHANDRA, PP. 229-234
Toughening of calcium hydroxyapatite with silver particles: X ZHANG, G. H. M GUBBELS, R. A TERPSTRA, R METSELAAR, PP. 235-243
Synthesis and study of organically capped ultra small clusters of cadmium sulphide: M KUNDU, A. A KHOSRAVI, S. K KULKARNI, P SINGH, PP. 245-258
Shear fracture mechanism in a rapidly-solidified aluminium scrap alloy: D. M LI, A BAKKER, PP. 259-266
Thermo-mechanical behaviour of plain weave fabric composites: Experimental investigations: N. K NAIK, V. K GANESH, PP. 267-277